Zinc Plated Pin Drive Expansion Bolts-Hammer Strike Pin Anchor Fasteners (10 MM x 200 MM), 24 Pieces

Product description Shop a wide range of pin type fastener from house of Pure Source India online, Pin Drive Expansion Bolts-Hammer Strike Pin Type Anchor Bolts are meant for push through method, Pin Type Anchors are impact-expansion type concrete anchors with an interior hole extending the length of the anchor. A hardened drive pin comes along the assembly inserted in the bolt. The anchor is threaded on the upper portion where the drive pin is inserted. Other end of the anchor has four equally spaced slots for a portion of its length, with ribs extending the circumference of the anchor for a portion of its length. Pin Type Anchors are yellow dichromate plated over zinc. Applications: Railings Profiled Steel Machines Gratings Fire Fighting Equipments Lighting Fixtures Conduit Pipes Gates Consoles Steel Constructions Air Conditioning Outdoor Unit Brackets Manufacturer Contact Information New Delhi, Customer Care - 9711239560, Mon to Sat- 9 to 8

• Item: Pin type Anchor Fastener With bolt and washer, 10 x 200 mm, 24 Pieces
• Round and smooth end for easy insertion, Drill bit diameter should same as Anchor diameter.
• Flat and hard head prevent any damage in thread during installation, good to use in concrete and masonry / grout filled cmu, any hard bricks wall / plastered wall.
• Hard Steel used with zinc plating to prevent any rust easly.
• Dimension: - Diameter - 10 mm, Lendth - 195 mm, Pin Size - 4 mm dia, 195mm length