Wood Grain Filler by E.S.C. Coatings

E.S.C. Coatings' Grain-Filler, a water-based solution, fills wood grain lines, preventing a smooth finish. It can be used clear or tinted with E.S.C. stains, dyes, or water-based colorants. Proper application and sanding are crucial for uniform staining. Apply using a squeegee at a 45-degree angle, let dry 45-75 minutes, then sand off surface filler. Deep pores should retain filler. Open-grained woods may require a second application. It dries to sand in under an hour at 75°F, allowing immediate recoating. Maximum 2 coats per day, with complete drying between. Clean equipment with water post-use.

• Wood Grain Filler: Enhances Wood Texture
• Versatile Use: Clear or Tinted with Stains/Dyes
• Tinting Tip: Match Finished Color, Not Raw Wood
• Unique Effect: Dark Tint, Light Stain
• Proper Application: Key to Uniform Staining
• Application Method: Squeegee at 45° Angle
• Drying Time: 45-75 Minutes
• Post-Drying: Complete Sanding Required
• Open Grains: Second Application May Be Needed
• Dry Time: Under 1 Hour at 75°F
• Coating Limit: Maximum 2 Coats per Day
• Clean-Up: Water Cleanse Equipment Immediately