Universal Straight Steering Column, 30 Inch, Stainless Steel, Polish,for 1920's -1950's era rods,Cobras, Other kit Cars.

Application：Overall length from end of lower splined shaft to upper end of housing around turn signal assembly is 30"This shaft extends past housing approximately 1-5/8"End of shaft for steering wheel or adapter is 11/16" x 36 splineMain housing is 1-3/4" O.D.Housing at top for turn signal is 4" in diameter and 2-5/16" tall or deepWire loom exits main column is 5-1/8" below the turn signal housingWire loom is approximately 23" long and has the GM style flat plug installedWire loom has 8 wires for horn, turn signal and flashersLower end of shaft is 3/4" x 36 splineM14x1.5 nut that uses a 22mm wrench to fasten the steering wheelComes with stainless turn signal lever and flasher button, horn wire pigtail and spring.NotesThis is a 69-94 style GM turn signal switch and should use the same color coding as factory. The color chart is as follows: BLACK HORN GROUND, LT.BLUE LEFT FRONT TURN ,BLUE RIGHT FRONT TURN ,BROWN HAZARD POWER, PURPLE TURN SIGNAL POWER, YELLOW LEFT REAR TURN, GREEN RIGHT REAR TURN ,WHITE BRAKE LIGHT INPUT

• Perfect for a wide variety of 1920's through 1950's era rods, as well as Cobras and other kit cars.
• The Nostalgia Columns offer a similar vintage look but have modern GM-style turn signal, hazard light and horn functions built into the attractive bell-shaped upper housings.
• The columns measure 30" long and have 3/4"-36 spline lower shafts. They're available with paintable stainless steel housings.
• 30" long,Beautiful Art-Deco styling
• Paintable Stainless steel,Turn signal, hazard light and horn functions