Therm-ic PowerSock S-Pack 1400 Bluetooth - 2 Pack

★★★★★ 4.1 89 Bewertungen
€104.98
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe
Verkauft und versendet von copisteriaunio.egardata.net
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€104.98
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe
Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 02.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar
Verkauft und versendet von copisteriaunio.egardata.net
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 235279969 Erscheinungsdatum 2026/07/02 Listenpreis €104.98 Modellnummer 235279969
Kategorie
  1. Outdoor & Sports
  2. Equipment & Accessories

The S-Pack 1400 Bluetooth battery is the most efficient in the range. With Bluetooth technology, you can adjust the heat settings remotely using your smartphone.

Features:

  • Bluetooth function
  • Warm feet for up to 16 hours
  • Pack comes with a USB charger
  • Wall charger not supplied S-Pack batteries are suitable for use with the Therm-ic PowerSocks heated socks
FIRST USE AND CHARGING OF THE S-PACK BATTERY: Important note:
  • The S-Pack battery must be charged before using them for the first time.
  • Preparing the USB wall plug universal charger (optional).
  • Slide your country-specific adapter into the slot on the back of the charger until it locks in with an audible click.
USB cable charging process:
  • 1. Plug the USB cable into the USB port. The charge indicator (2.2) will light up green. Next, you plug the charging connectors of the cable into the batteries S-pack (2.4). Please check the illustration on the charger to ensure proper orientation. The S-Pack battery can be charged in any operating mode. The charging process will start automatically and the charge indicator (2.2) will light up in red during charging.
  • 2. Once the S-Pack batteries are fully charged, the charging process is automatically concluded and the LED on the charge indicator (2.2) will switch back to green.
  • 3. LED blinking on USB S-Pack charger between green and red when charge above 95%. LED stays green when fully charged.
  • 4. Remove both S-Pack batteries from the charging shaft.
  • 5. After the S-Pack batteries have been charged, they are automatically in POWER OFF mode. Important note: • Recharge the S-Pack battery after each use. This extends the service life of the batteries and ensures that the device is always ready for use. • The battery consists of lithium ion cells and can be charged in any state. For this reason, the battery does not need to be fully discharged before charging. • When starting the charging process, the S-Pack battery can be in any operating mode (POWER OFF, IN USE) • The full charging capacity of the S-Pack battery can only be conserved if the S-Pack battery are removed from the charging station after the charging procedure is complete. HOW TO USE THE POWERSOCK BATTERY
  • • Wear the heatable sock.
  • • Push the S-Pack battery on to the snap fasteners until they audibly lock into place (3.2).
  • • The S-Pack battery can be controlled with button (1.3) or with a iOS and Android app (only for S-Pack Bluetooth® enabled). IMPORTANT INSTRUCTIONS FOR USE:
  • • Do not allow the highest heat level to be switched on for more than a few minutes at a time. This could produce too much heat during operation, which may cause burns.
  • • Always set S-Pack battery to low or moderate heat levels to maintain comfortable foot warming (heating should be almost undetectable).
  • • The optimum heat output is only reached when the socks, boots or soles are dry.
  • • Never used the heatable sock and the heatable insole together; this can result in too much heat - risk of burning! Information about Therm-IC S-Pack Battery Styles: S-Pack without bluetooth® The S-Pack battery has 4 operating modes: POWER OFF – IN USE LEVELS 1-2-3. They are indicated with the heating level display on the S-Pack battery. The LED flashing modes corresponds to the selected heat setting. S-Pack with bluetooth® Using the phone App: Please refer to the Bluetooth® app or www.therm-ic.com. Turning the device on: Press the control button (1.3) for a long period of time (approx. 3 sec) to turn on the S-Pack battery at the lowest heat level. If the control button is pressed for too long (approx. more than 6s), the S-Pack will remain in OFF mode.

    • Therm-ic PowerSock S-Pack 1400 Bluetooth - 2 Pack

    Therm-ic PowerSock S-Pack 1400 Bluetooth - 2 Pack

    Korrektur der Produktinformationen

    Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

    Korrekturanfrage

    Kundenbewertungen

    4.1 von 5
    ★★★★★
    89 Bewertungen | 36 Rezensionen
    So wird die Artikelbewertung berechnet
    Alle Bewertungen anzeigen
    5 Sterne
    77% (69)
    4 Sterne
    7% (6)
    3 Sterne
    4% (4)
    2 Sterne
    2% (2)
    1 Stern
    10% (9)
    Sortieren nach

    Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.