SSC Controls G502-MO Foot Switch, Electrical, Momentary Action, Heavy Duty, Single Pedal, Industrial, DPDT, Made in USA

The G502-MO is a heavy-duty foot switch that makes it easy to turn electrical equipment on and off with the foot, freeing the hands to perform other operations or providing ergonomic improvement to a workstation. Features all aluminum construction, an oversized guard (5.5” high, 6.2" wide) with enough room to fit large boots, and an oil/water/splash/dust-resistant enclosure (when used with the proper cable clamp). This is a momentary foot switch, which means that it actuates when your foot is on the pedal, and de-actuates when you release your foot from the pedal. Includes two 20-amp 125/250VAC-rated switches with one common, one normally open, and one normally closed contact (SPDT, Form C) on each switch. Can be adjusted so that both switches actuate at the same time (DPDT circuitry), or can be staggered to go off at separate times as the pedal is pressed. Side cover flaps help protect pedal lever and shaft from oil, solvents, and water. 3/4"-14 N.P.T. threaded conduit entry in back. Replaces JLG 4360031. Also see the SSC Controls C1 Cable Clamp or C2 Cable Clamp if you don't already have a strain relief. UL/CSA/NEMA Enclosure Type 2, 4,

• Electrical heavy-duty foot switch with oversized guard to turn on and off a device.
• Momentary action - Press and hold foot pedal to turn on, release to turn off.
• Includes two 20 A, 125 / 250 VAC, SPDT switches (set as DPDT or can be staggered).
• Rugged cast aluminum housing is oiltight, dusttight, & watertight (when properly connected).
• Made in USA. Certified to UL and CSA standards.