PLA Silk 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.02 mm, 1KG Spool (2.2lbs) PLA Gradient Color
Produktdetails
| Artikelnummer | 238058066 | Erscheinungsdatum | 2026/07/11 | Listenpreis | €8.80 | Modellnummer | 238058066 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
<p>▶Parameters:</p> <p>▶Material: PLA</p> <p>▶Printing Temperature: 195-230°C</p> <p>▶Print speed: 50-200mm/s</p> <p>▶Color: Gradient Color</p> <p>▶Bed Temp:40~60℃</p> <p>▶Diameter: 1.75mm</p> <p>▶Tolerance: 0.02mm</p> <p>▶Recommended layer height: 0.1-0.2MM</p> <p>▶Net weight：1kg</p>
- 【Tri-Colors Silk PLA Filament Advantages】 Smooth and glossy finish like real silk, no extra polishing needed. PLA+ 3D printer filament is improved and upgraded based on PLA filament, easy to use, better layer adhesion, high strength and better toughness. Every inch of this magic 3D filament is made of three colors, different prints will present different effects.
- 【Dimensional Accuracy & Consistency】 Our 3D printer PLA+ filament of 1.75mm diameter, minimum tolerance and low warpage to ensure consistent feeding and stable prints. Dimensional accuracy + /- 0.02mm.
- 【Tangle-Free & Bubble-Free & Clog-Free】 Perfectly coiled silk coextruded colour PLA+ filament, tangle-free before unopening, no stringing and warping. Total length: 340-350m.Recommended printing temperature: 210-240℃. Melt well, feed smoothly and constantly without clogging the nozzle or extruder.
- 【Vacuum Sealed Packaging】 Net weight: 1KG. Net weight: 1KG. Our PLA+ filament comes in a sealed vacuum bag with a desiccant bag to keep it dry and keep out dust and foreign particles, prevent nozzle clogging and produce smooth 3D models.
- 【Wide Compatibility】 Compatible with most FDM 3D Printers that use 1.75mm filament, such as: Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge, etc.
| Filament diameter | 1.75 mm |
|---|---|
| Material | PLA |
| Brand | LANZOELIFE |
| Color | RED-GREEN-PURPLE |
| Compatibility | Most FDM 3D Printers |
| Weight | 2.2 lb |
| Filament materials supported | PLA |
| Compatible models | Prusa, Reprap, Afinia, MakerBot, PrintrBot, UltiMaker, Airwolf, Aleph Objects, Makergear, Up, Lulzbot, Simplify3D, Flashforge |
| Items included | 1* 3D Printer Filament |
| Retail packaging | Single Piece |
| Pack quantity | 1 |
| Product net content parent | 1 Kilogram |
| Product net content uom | Kilogram |
| Height | 2.76 in |
| Has written warranty | No |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage