Parking Brake Actuator(w/control unit) Replacement for BMW X5 E70 X6 E71 E72 34436850289 34436782205 34436788556

I. OEM Part Number:34436850289344367794513443678220534436785487344367885563443678896834436796072II.The Part will fit the followings: Replacement for BM-W 2007-2013 X5 E70 Replacement for BM-W 2008-2014 X6 E71 E72III. Handbrake installation steps: 1) Check the dE GRee of wear on the skin of the handbrake. If the wear is serious, it is recommended to change the hand brake skin first. (Note: handbrake skin, not foot brake skin) 2) Install the handbrake cable and adjust the gap between the handbrake and the brake drum as small as possible. 3) Plug in the computer plug, open the phone key door, check if the electronic handbrake module works normally (the second and third steps must not be reversed) 4) If the electronic handbrake template works normally, finally install the emergency unlocking line. Notice: 1.Do not pull the emergency unlocking line at any time, unless the handbrake template is damaged, can't be removed, pull the emergency unlocking line, and the hand brake computer cannot continue to use after hearing the ¡°kaba¡± sound. 2.If some fault codes cannot be cleared, drive a circle of approximately 5 to 10 kilometers, then go back, stop the fire, try again, and some fault codes will be automatically deleted.

• Replacement for BMW 2007-2013 X5 E70 ; Replacement for BMW 2008-2014 X6 E71 E72
• OEM Part Numbers: 34436850289, 34436779451, 34436782205, 34436785487, 34436788556, 34436788968, 34436796072
• Feature: Parking Brake Actuator used to brake the car after parking to prevent the car from sliding forward and backward due to uneven roads, Constructed Of Premium Material For Long Lasting Durability And Reliability
• Make sure to find a professional garage to install this part, it has to be programmed before installing, it gets a little complicated We therefore strongly recommend finding a professorship garage to install and set it up
• Please check your brake pads or brake pump, if they need to be replace and adjust the distance between the brake pads or it could close after installation