OTC 6474 Camshaft Alignment Tool for Select 1994-2014 4-Cyl. Ford, Mercury, and Lincoln Vehicles

OTC's Ford Cam Pulley Holding Tool is a 'must have' for ensuring both cams stay in sync when belt is disconnected for replacement or other procedures which require belt removal. Simply rotate the engine to top-dead-center and slide the precisely sized tool across the lip of the cylinder head into the slots on the back ends of the camshafts to ensure cam alignment. Note: The camshaft timing slots are offset - if the camshaft alignment timing tool cannot be installed, rotate the crankshaft one complete revolution clockwise to correctly position the camshafts. Fits the following vehicles: 1994 - 2002 2.0L Contour, Mystique (VIN 3); 1999 - 2002 2.0L Cougar (VIN 3); 2012 - 2014 2.0L Edge, Explorer (VIN 9); 2001 - 2004 2.0L Escape (VIN B); 2013 - 2014 2.0L Escape (VIN 9), Fusion, MKZ, Taurus; 2005 - 2008 2.3L Escape, Mariner (VIN Z); 2009 - 2014 2.5L Escape (VIN 7); 2005 - 2008 2.3L Escape Hybrid, Mariner Hybrid (VIN H); 2009 - 2012 2.5L Escape Hybrid, Mariner Hybrid (VIN 3), 2012 - 2014 2.0L Focus (VIN 2); 2000 - 2004 2.0L Focus (VIN 3); 2002 - 2004 2.0L Focus (VIN 5); 2005 - 2012 2.0L Focus (VIN N); 2003 - 2007 2.3L Focus (VIN Z); 2006 - 2009 2.3L Fusion, Milan, MKZ, Zephyr (VIN Z); 2010 - 2014 2.5L Fusion (VIN A); 2010 - 2014 2.5L Fusion Hybrid (VIN 3); 2009 - 2012 2.5L Mariner (VIN 7); 2010 - 2011 2.5L Milan; 2010 - 2012 2.5L Milan Hybrid, MKZ Hybrid (VIN 3); 2014 2.0L MKT; 2012 2.0L MKX (VIN 9); 2010 - 2012 2.5L MKZ (VIN A); 2001 - 2011 2.3L Ranger (VIN D); 2010 - 2013 2.0L Transit (VIN N). Same as Ford No. 303-398 (T92C-6256-AH). Heavy duty metal construction for long life. Comes with complete instructions for proper use of tool. Value is at the core of the OTC tool and equipment portfolio. Whether it’s a simple repair or the most complex drivability concern, these award-winning tools universally solve problems faster, and at better value, than any other product line available. Whether it’s a specialty tool or unique piece of service equipment, OTC provides top solutions to modern automotive service challenges while increasing technicians’ productivity and shop profits.

• OTC's Ford Cam Pulley Holding Tool is a 'must have' for ensuring both cams stay in sync when belt is disconnected for replacement or other procedures which require belt removal
• Simply rotate the engine to top-dead-center and slide the precisely sized tool across the lip of the cylinder head into the slots on the back ends of the camshafts to ensure cam alignment
• Note: The camshaft timing slots are offset - if the camshaft alignment timing tool cannot be installed, rotate the crankshaft one complete revolution clockwise to correctly position the camshafts
• Tool is designed for use on many Ford, Mercury, and Lincoln vehicles equipped with 2.0L, 2.3L, 2.5L 4-cylinder engines - see product description below for a complete list
• Same as Ford No. 303-398 (T92C-6256-AH); includes complete instructions for use of tool