New In tank Check valve for air compressor 3/4" comp x 3/4" mpt
Produktdetails
| Artikelnummer | 219089838 | Erscheinungsdatum | 2026/05/03 | Listenpreis | €5.98 | Modellnummer | 219089838 | ||
|---|---|---|---|---|---|---|---|---|---|
| Kategorie | |||||||||
The check valve is an important part of any air compressor. The air compressor check valve can be found on almost any compressor out there. The check valve has only one function: to let air flow from one side to the other, while blocking air flow in the opposite direction. Once the compressed air passes the check valve, there is no way it can go back again. 3/4" NPT measures 1.050 on a tape measure, ruler, or caliper MADE IN USA 450 PSI MAX PRESSURE 400 DEG F. MAX TEMPERATURE 3/4" COMPRESSION PIPE THREAD TOP INLET X 3/4" MALE (NPT) PIPE THREAD OUTLET TO TANK 1/8" UNLOADER PORT INCLUDED 30 SCFM FLOW RATE
- 3/4" COMPRESSION PIPE THREAD TOP INLET X 3/4" MALE (NPT) PIPE THREAD OUTLET TO TANK
- 1/8" UNLOADER PORT INCLUDED, 30 SCFM FLOW RATE
- 3/4" NPT measures 1.050 on a tape measure, ruler, or caliper
- 450 PSI MAX PRESSURE 400 DEG F. MAX TEMPERATURE
- MADE IN THE USA
| UPC | 685650061511 |
|---|---|
| Size | 3/4 in. |
| Brand Name | conrader |
| Unit Count | 1.0 Count |
| Valve Type | Check Valve |
| Item Weight | 0.1 Kilograms |
| Thread Size | 3/4" |
| Thread Type | NPT |
| Manufacturer | CDI/STEUBY/CONRADER |
| Model Number | C7575T |
| Material Type | Brass |
| Connector Type | Compression |
| Exterior Finish | Brass |
| Item Dimensions | 3 x 1.25 x 1.25 inches |
| Number of Ports | 1 |
| Maximum Pressure | 450 Pound per Square Inch |
| Specification Met | ASME B16.34, ASME B16.5 |
| Included Components | 1 Check Valve |
| Inlet Connection Size | 0.75 Inches |
| Inlet Connection Type | Compression |
| Outlet Connection Size | 0.75 Inches |
| Outlet Connection Type | NPT |
| Manufacturer Part Number | C7575T |
Korrektur der Produktinformationen
Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.
Korrekturanfrage