MuxLab 6G-SDI Extender Over UTP 500730 6G 3G SDI Video Extender Over UTP Cat5e/6 RJ45 Plug Cable Supports 4K Resolution

MuxLab 6G-SDI Extender Over UTP 500730 6G 3G SDI Video Extender Over UTP Cat5e/6 RJ45 Plug Cable Supports 4K Resolution

The 6G-SDI Extender is a unique solution from Muxlab for extending SDI based cameras or other SDI sources up to 4K resolution with the added benefit of extending the Hi Resolution signal up to 330ft (100m).

Standard Cat5e/6 UTP cable is used for the extension. The 6G-SDI Extender supports PoE, whereby the Transmitter may be powered by the Receiver. The product allows for versatile combinations of sources, including one 6G-SDI source, two 3G-SDI sources or four HD-SDI sources.

Key Features

• Up to 330ft (100m) at full resolution
• Supports one 6G-SDI source, two 3G-SDI sources, or four HD-SDI sources
• Up to 4K @ 30Hz resolution
• Supported modes: SMPTE 292M, SMPTE 296M, SMPTE 372M, SMPTE 424M, SMPTE 425M
• Supports all 6G channel configurations (1/2/4)
• Automatic SDI Link recognition and configuration
• Automatic activation of long reach mode 500ft (150m) when a 3G signal is detected
• USB interface for field upgradeable firmware and diagnostics
• PoE powered, power Transmitter from Receiver
• Ethercon Connectivity and Aluminum Enclosure for ruggedized use

Technical Specifications

Environment:
6G-SDI digital signal transmission
Enclosure Type & Dimensions:
Black Metal, Dim: 5.6 x 4 x 1 (14.2 x 10.1 x 2.54cm) (RX) /
4.3 x 4.3 x 1 (10.9 x 10.9 x 2.54cm) (TX)
Control:
Serial console emulation with USB interface
Front panel (RX):
Mini USB for firmware updates status LEDS
Rear panel (RX):
+48 V power jack
BNC for SYNC input signal
RJ45 for UTP cable between RX and TX unit
4x BNC connectors for SDI output
Front panel (TX):
BNC for SYNC output signal
4x BNC connectors for SDI output
Rear panel (TX):
RJ45 for UTP cable between RX and TX unit
Top panel (TX):
Mini USB for firmware updates status LEDS
Connectors (SDI in):
4 BNC connectors for SDI input ( 0.8V pp, 75 ohm )
Connectors (SDI out):
4 BNC connectors for SDI output ( 0.8V pp, 75 ohm )
Connectors (sync):
2 BNC connectors
Connectors (control):
Mini USB, for configuration and firmware updates
Connectors (UTP ):
RJ45 / Ethercon, for UTP communication
Connectors power:
One standard 2.1mm power jack
Compliance:
FCC, CE, RoHS
Power:
48V external power supply with US, UK and Euro blades