Manifold Hot Tub Spa Part 18 3/4" Outlets with Glue & Coupler Kit Video How to

See the Informational videos here first. This kit is a 18 Kit with (3) 2" Spigot/Street X 2" Slip X (6) 3/4" Barbed manifolds, Barbs, Clamps, Tube with a Glue & Coupler Kit. The Kit consists of (3) Manifolds total (3) with (6) 3/4" Barbs each totaling 18 Outputs, (3) 3/4" Plugs to cut the manifolds down to 17,16 or 15 outputs, a 2" Coupler, 6" of 2" Soft Pipe, (36) 3/4" Clamps, (18) 3/4" x 3/4" Barbed couplers, 54" of Clear 3/4" Tube so you have about 3" per extension and a Glue Kit with 4oz Blue Glue and 4oz of Purple Primer. The kit is to be used to replace a broken manifold and extend the output side tubes and use the coupler to spin it to win it on the old pipe and then glue the 6" piece of 2" Flex in and then glue the manifolds in from there. For a Video about Manifold parts go to YOUTUBE and look for "Spa Hot Tub Barb Style Manifolds The Hot Tub Professor" or " Spa Freeze Damage Repair Manifolds Leak Hot Tub Professor How To Video" or "Spa Hot Tub Flex Pipe Glue In Style Water Manifolds The Hot Tub Professor"

• Cracked Manifold Kit 2" X (18) 3/4" Barb Dead End Manifold Kit With Glue
• Accepts 2" PVC Pipe Which emasures about 2 3/8" OD
• (18) 3/4" Ribbed Barbs
• Look at our Video in the picture area for information about this kit..
• Comes with (3) Barb plugs to make the manifolds a 17,16 or 15 Barb