LED Tail Brake Lights Turn Signal Integrated Compatible With YAMAHA MT-09 / MT09 SP 2021 2022 2023,MT-10 /SP 2022 2023 (Clear)

Fitment：Compatible with MT-09 / MT09 SP 2021 2022 2023 Compatible with MT-10 MT10SP 2022 2023*Please confirm fitment before ordering.Features:Product SpecificationsMaterial: Acrylic Clear Lens / ABS Black CoverAvailable Lens Colors: Smoke / Red / ClearLight Colors: Red (Tail/Brake Light) / Amber (Turn Signal)Function: Integrated Tail Light, Brake Light, Left/Right Turn SignalsInstallation: Direct replacementPackage Includes1 × Integrated LED Tail Light Turn Signal Assembly(Installation instructions not included; please refer to product images for installation guidance)Important NotesThis item is an aftermarket product. Wiring Diagram applicable to most bikes: Black Wire(Negative), Green Wire(Brake) Red Wire(Running Light) 1. Connect one end of the resistor to the ground wire on your turn signal harness from your bike. 2. Connect the other end of the resistor to both the YELLOW wire from our taillight and the positive turn signal wire from your turn signal harness from your bike. 3. Repeat the same process for the other side. To use the red connectors, place one wire inside along one channel, place another wire inside along the other channel. Push down the metal pin as it will make a small cut on each wire bridging the connectors. if you are using the resistors, place one end of the resistor in the middle of either channel along with the one wire.⚠️ IMPORTANT INSTALLATION NOTICE (PLEASE READ BEFORE PURCHASE):Do not install directly. Please test the wires with an external battery before installation to confirm the function of each wire.Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding.This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.

• ⚠️ IMPORTANT INSTALLATION NOTICE (PLEASE READ BEFORE PURCHASE): *Do not install directly. Please test the wires with an external battery before installation to confirm the function of each wire. *Improper installation may cause malfunction or damage. During installation, thread locker MUST be used on all screws to prevent loosening due to vibration while riding.
• *This product is intended for users with basic motorcycle modification and wiring knowledge. If you are not experienced, professional installation is strongly recommended.
• Compatible with MT-09 / MT09 SP 2021–2023 and MT-10 / MT10 SP 2022–2023. Please confirm your motorcycle model and year before ordering.
• Integrated 3‑in‑1 LED DesignCombines running light, brake light, and left/right turn signals in one assembly. Features bright red light for tail/brake and amber light for turn signals, improving riding safety and visibility.
• Premium Material & Multiple Lens OptionsMade with high‑strength acrylic clear lens and durable ABS black cover. Available in smoke, red, and clear lens options to match different motorcycle styles.
• Simple Wiring & Direct InstallationStandard wiring: Black = negative, Green = brake, Red = running light. Plug‑and‑play direct replacement with no modification. No instructions included; install easily with listing photos.
• Resistor & Connector GuideIf turn signals flash rapidly, install a resistor: connect one end to turn signal ground, the other to taillight yellow wire and turn signal positive. Use red quick connectors by inserting wires into channels and pressing the metal pin for stable connection.