KeylessOption Keyless Entry Remote Starter Car Key Fob Alarm for Aftermarket Viper Automate EZSDEI474V 474V (Pack of 2)

KeylessOption is a quick, easy and affordable way to replace your keyless entry remote control car key fob. This is a replacement remote for an aftermarket alarm / remote start system. Plase make sure FCC ID from original remote matches EZSDEI474V. Programming instructions may very please check owners manual or manufactorers websiteProgramming Instructions will require accessing valet/programming switch 1) Open a door and make sure the dome light is on.2) Turn the ignition on to the RUN position or start the car.3) Within 15 seconds press and release the Valet/Program push button 1 time for vehicles with remote start or 7 times for vehicles without remote start. Then press once more and hold the valet/ program switch down. You will get a confirmation chirp by either the flashing parking lights, or the horn honk or both4) Press the lock button on the transmitter. A chirp or horn-honk will confirm that the code has been learned. 5) Once the code is learned, the Valet/Program push button can be released.6) Turn car off and test.

• KeylessOption Fully tested complete replacement keyless entry remote key fob with will electronics already installed
• Compatible with: EZSDEI474V, 473V -For Viper, Dei, Automate, Valet, Avital, Clifford, Python Aftermarket Alarm remote starter systems
• Please make sure original remote has same FCC ID EZSDEI474V - Please check owners manual or manufactorers website for DIY Step-by-Step programming instructions
• Replacement 1-Way 3-Button remote compatible with the following remotes 470T, 471T, 474V, 475Q, 475T, 476V, 487V, 488V, 489V, 4171V, 7541V
• This is a replacement part to match the original in form and function