Huanyu M8-M24 Spare Blade for Hydraulic Nut Splitter Nut Cutter Split type Remover Opener Splitting Cutting Removing Tool (JK-24 Spare blade)

Huanyu About the product: This split nut separator needs to be used with a manual hydraulic pump. The cutter head is made of alloy steel and is heat treated to be durable. The three models of this product are adapted to the needs of different nuts and are consistent in material and design. Standard : nut cutter, small blade (installed), large blade, hex wrench A set of spare blades: 1 large and 1 small blade. JK-24 nut splitter is recommended with CP-180 manual pump. JK-27 & JK-30 nut splitter is recommended CP-700 manual pump This nut cutter is not recommended for cutting high strength nuts. Features: Alloy steel clamp head：The clamp head is made of alloy steel and is heat treated to be durable. Quick connector: The male connector is connected with the female connector on the hydraulic pump. Thread size Z63/8", plastic dust jacket to prevent dust from entering. Pressure relief switch design：Tighten (ON) when pressing, and loosen (OFF) when depressurizing Thickened cylinder：The manual pump cylinder is thickened and lengthened, and the maximum tonnage among three types is 70Mpa. Specifications: Model: JK-24 spare blade Contain: one large and one small blade

• Model：JK-24 Spare blade ; Nut range: M8-M24, 14MM-36MM
• Alloy steel clamp head:The clamp head is made of alloy steel and is heat treated to be durable.
• Quick connector: The male connector is connected with the female connector on the hydraulic pump. Thread size Z63/8", plastic dust jacket to prevent dust from entering.
• Pressure relief switch design:Tighten (ON) when pressing, and loosen (OFF) when depressurizing.