Household Chimney Fan 100W Induced Draft Fan Kitchen Chimney Blower Fan Fireplace Exhaust Fan Exhaust ​Smoke Machine

Electric Draft Inducing FanSpecification:Voltage: 220V ( 110V-120V voltage, we will be equipped with a voltage converter)Power；100WApplicable chimney diameter:A Chimney Fan for Flue Diameter 12.5-20cmB Chimney Fan for Flue Diameter 13.5-21cmC Chimney Fan for Flue Diameter 23cmPackage Included1 *Induced draft fanNote1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire2. When installing or removing, please turn off the power switch to avoid electric shock.3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the best effect.5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.

• * 100W Electric Draft Inducing Fan, A Chimney Fan for Flue Diameter 12.5-20cm;B Chimney Fan for Flue Diameter 13.5-21cm;C Chimney Fan for Flue Diameter 23cm;Please choose the appropriate Chimney Fan.
• * It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney.
• * The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
• * This Type of Induced Draft Fan is Used on Household Chimneys /Fireplace , and the Outlet Temperature Should Not Exceed 80 Degrees. The Induced Draft Fan Should Be More Than 6 Meters Away from the Fire Source.Otherwise the Induced Draft Fan Will Be Burnt.
• * Perfect for wood stoves, fireplaces, fireboxes, furnaces, boilers, water heaters, outdoor wood furnaces, or other residential heating appliances fueled by wood, gas, coal, or oil