HiLetgo 2.2 Inch ILI9341 SPI TFT LCD Display 240x320 ILI9341 LCD Screen with SD Card Slot for Arduino Raspberry Pi 51/AVR/STM32/ARM/PIC (Pack of 2)

Specifications: Resolution: 240x320 Driver IC: ILI9341 Input Voltage: 5V/3.3V Size 2.2 inch, It has PCB backplane with power IC, SD card socket LED Numbers 4 LEDs, Driver IC: ILI9341, Color Depth 262K/65K Module Size:67mm(length)*40mm(width)*4mm(thickness), Active Area: 47.5mm(Length)x36.5mm(Width) Package Included: 1*2.2" 2.2 inch 4-Wire SPI TFT LCD Display Module How to use it? 1. use 5v to led pin, 3.3v to vcc and 1k / 1.5k resistor voltage dividers to get it to work. 1k resistor in series from Arduino to tft logic pin, 1.5k from tft pin to ground. 2.#define TFT_DC 9#define TFT_CS 10#define TFT_MOSI 11#define TFT_CLK 13#define TFT_RST 12#define TFT_MISO 83.// Use hardware SPI (on Uno, #13, #12, #11) and the above for CS/DC//ILI9341 tft : ILI9341(TFT_CS, TFT_DC);4.// If using the breakout, change pins as desiredILI9341 tft : ILI9341(TFT_CS, TFT_DC, TFT_MOSI, TFT_CLK, TFT_RST, TFT_MISO).Serial monitor output:1-- ILI9341 Test!Display Power Mode: 0x94MADCTL Mode: 0x48Pixel Format:0x5ImageFormat: 0x80Self Diagnostic: 0xC0Benchmark Time (microseconds)2-- Screen fill 18159720Text 921664Lines 8537648Horiz/Vert Lines 1485756Rectangles (outline) 946520Rectangles (filled) 37689232Circles (filled) 5325780Circles (outline) 3725412Triangles (outline) 1944508Triangles (filled) 12525852Rounded rects (outline) 1782700Rounded rects (filled) 40989648

• The information below is per-pack only
• Durable hard PCB board and SD card socket, ideal for 5110 interface
• 2.4 inch TFT LCD shield without touch panel, fast to operate
• Support Serial SPI Mode, Interface 4-Wire SPI, Need 4 IOs from your MCU only
• Support a variety of microcontroller IO connection, professional and practical