High Voltage 110V 220V 3 4 5 6 Channel Remote Switch Controller 1000W/CH LED Wireless Digital Segmented Remote Control (Color : 220V 4 Channel)

DimmersModel: 1. 110V LED 4/6 remote control switch2. 220V LED4/6 remote control switchnotes:6 sets of light control only require 220VSpecification voltage: AC100-130V or AC200-240V (2 choices)Power: 1000W/channelTotal power: 4/6 channels X 1000WRemote control: wireless radio frequency induction remote controlRemote control distance: greater than or equal to 30MRemote control battery: 23A 12V (no battery) Remote switch function: Press the corresponding buttons of the "A, B, C, D" keys on the remote control to independently "turn on" or "off" and press the "OFF/ON" key to turn on or off.The white wire on the left is the signal wire and is not connected. (Picking up any cord will damage the receiver).Note: The remote control switch receiver is generally connected to the lamp chassis (light panel), the receiver is connected in series with the original switch, and the remote control is used to synchronize with the original switch. You can also directly connect to the 220V power supply, so it can be completely controlled by the remote control! The installation location of the receiver is not restricted and can be installed to any location you feel is appropriate, as long as it is convenient for you to connect.Installation requirements 1. The product leads are intact before installation, and the access voltage and load are consistent with the product identification.2. Power lines, lamps, and supporting switches should comply with corresponding electrical standards.3. Connect strictly according to the wiring diagram.4. Warm reminder: When the remote control indicator light dims, the remote control distance becomes shorter and the sensitivity decreases. Please replace the battery.Package Included:1*LED Controller (without battery) (according to your choice)

• Dimmers