High FlowHand Pump Portable Manual Car Fuel Transfer Pump for Upgrade 20MM diameter nozzle， for Gas/Oil/Water/Fuel Transfer Siphon Pump with 2M Syphon Hose

The Way To Use： 1. Keep the arrow on the sphere down 2. Insert the upper tube into the fuel tank 3. Insert the lower tube into the container 4. Pinch the rubber ball 3-5 times 5. Liquid outflow 6. Turn the valve to start or end pumping, which is more convenient to use Self-check Points When Siphon Pump Can't Work Normally: 1. Both of the source container and the target one are not in a sealed state. 2. Both of the hoses should be installed to the pump bulb, it can't work with only one hose installed on one side. 3. Both of the hoses are not knotted or twisted together. 4. Exhaust the gas out from the hoses before using. 5. Keep the end of the two hoses inside the containers during using, NOT just on the surface. Please Note: 1. If the siphon pump hoses have kinks, please try to soak the kink part into a small amount of hot water for 1-3 minutes to restore it, then will not affect the use of function. 2. Never start the siphon process with mouth, it's extremely dangerous and grossly inefficient. Not suitable for drink water, salt water and any chemical & corroding liquids

• High Quality : Rubber hand pump durable lengthen and thicken clear PVC pipe, oil, high temperature and corrosion resistant makes this pump transfer more quickly,
• Easy to Use : Lightweight and portable siphon hand pump, ideal for various vehicles without anti-theft filter net, such as lawn Mower, brush cutter, hedge trimmer, etc.Turn the valve to start or end pumping, which is more convenient to use
• Wide Usage : This manual water pump is for fuel petrol diesel gasoline oil water and other common liquids,ideal for emergency gas transfer.
• Attention : The fluid you are trying to extract has to be HIGHER than the influent bucket There's a mark "arrow" on the surface of hand pump.Please keep the arrow down before pumping.The fitting end must kept inside of the fluid not just on the surface. To extract the oil in the fuel tank of the car, there must be no anti-pumping filter in the fuel tank
• Package List : 1 x good suction sphere，1 x Hose (Needs to be cut customized and installed depending on your needs.L:2m, D: 20mm. )，2 x valve clips ，1 x Rotary valve