GSR40 Pneumatic Nail Gun 7. 2V Lithium Battery Electric Nail Gun Air Stapler Pneumatic Tools For Frame And Trunking, DIY Tools(With 1pc Battery)

Specifications:Name: GSR40 Gas Nail GunCharger voltage: 110-220VWorking voltage: 7. 2VNumber of Nails: 30Gasconsumption: 1000-1200 times/canWorking rate: 120 times/minuteScope of application: fixed door and window frames, billboards, brackets, trunking,air conditioning ducts, iron sheets, etc.Note:The product does not contain gas.Charger instructions:When the battery is plugged in and charged, the red light is always on,and the green light is displayed when it is fully charged.If the battery is reversely inserted and charged, it will cause the chargertoburn out,so pay attention to the positive and negative poles of the battery.Indicator Light:The yellow light is always on: it means it needs cleaningCommon Problems:1. The striker does not resetReason analysis: long-term non-cleaning will cause the air tankto be unsealed.Normally, it will be cleaned every 2000-5000 nails.Solution: Need to clean the cylinder head, cylinder, lubricate oil,and adjustthe openingdirection of the piston ring to 180°.2. The fan rotates, but the gas gun does not soundSolution: Check the quality of the air intake nozzle;gas cylinderandthe ignition coil, etc.3. The nail cannot be completely driven inReason analysis: wear of piston rodSolution: Replace the piston rodReasons and solutions for the nail gun not working properly:1. The nail gun has a safety device, which cannot be driven when there are only a few nails;2. Check the gas, refer to the video to test the gas3. After eliminating the previous problem, you can try to remove the 4 screws of the cover, then turn the cover up, then press the trigger, check whether the fan is running and whether the ignition is normal, the ignition position needs to be kept clean and free of foreign objects, then If the rubber ring is dry, apply some lubricant to it. For details, pl

• 1. Steady green light: indicates normal operation
• 2. Green light flashes: indicates that it is in standby
• 3. Steady red light: indicates insufficient battery
• 4. Red light flashes: it means you need to take a break after overheating
• 5. The red and green lights flash alternately: it means it is close to the
• thermal protection temperature