Front End Suspension Rebuild Kit Idler Arm Compatible with Chevrolet 2WD C20 3/4 Ton Pickup OEM Spec Replacements (17 Piece Kit)

This Kit is constructed using High-Quality OEM spec replacements for 1968-1970 Chevrolet C20 3/4 Ton Pickups (2 Wheel Drive Only). These parts are Factory Design and will only work with Stock Vehicles. This Kit Contains All Of The Pieces Below: Inner Tie Rod Ends (Right and Left), Outer Tie Rod Ends (Right and Left), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Shaft Kits (2 Each), and Idler Arm. This Kit Also Contains The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.

• YEARS: 1968, 1969, and 1970
• MODELS: Compatible with Chevrolet 2WD C20 3/4 Ton Pickup
• HIGH-QUALITY: OEM Spec Replacements
• INCLUDED IN THE 17 PIECE KIT: Inner Tie Rods (2 Each), Outer Tie Rods (2 Each), Tie Rod Sleeves (2 Each), Sway Bar Bushings (2 Each), Upper Control Arm Shaft Kits (2 Each), Lower Control Arm Shaft Kits (2 Each), Upper Ball Joints (2 Each), Lower Ball Joints (2 Each), Idler Arm
• ALSO CONTAINS: The Cotter Pins, Rubber Grease Seals/boots, Zerk Fittings (When Applicable), And The Bolts For The Ball Joints, Plus The Tie Rod Sleeve Bolts, Nuts, And Clamps.