Estink Shoes Sole Stickers, PVC Rubber Self Adhesive Sole Cover Protectors, Anti Slip Transparent Cut to Fit 10 cm Width for High Heels Boots Dress Shoes Outdoor Use (1m/3.3ft)

【Self Adhesive Grip】Shoes sole stickers use PVC rubber with a self adhesive backing to attach firmly to the area touching the ground. The textured surface helps reduce slipping on high heels boots and dress shoes. 【Transparent Sole Cover】Anti slip sole protectors feature a clear design that stays less visible on the bottom of shoes. Suitable for heels stilettos and boots while helping protect the sole from daily outdoor wear. 【Cut to Fit Design】Width is approx 10 cm 3.9 in and the sheet can be trimmed with small scissors for different shoe shapes. Apply only to the front sole contact area for a more precise fit. 【​ Backing】The backing resists wear ​ and weathering for longer use in outdoor conditions. After application press repeatedly for a firm bond and wait 24 hours before wearing the shoes. 【Easy Removal Method】To replace the sole protector stickers heat the sole gently with a hair dryer to soften the adhesive, then peel slowly. This method helps remove the sticker with less pulling on the sole surface. Spec: Item Type: Shoes Sole Stickers Material: PVC Rubber Product Color: As Pictures Shown Width: Approx 10 cm/3.9 in Product Weight: Approx. 72-223g/2.5-7.9oz Instructions: 1. Prepare the necessary tools: Sole stickers, small scissors. 2. Cut the appropriate length, only need to paste the front part of the high-heeled shoes that is in contact with the ground. Generally, the high-heeled shoes can be pasted 3 pairs per meter, and the flat-bottomed shoes can be pasted 2 pairs (the heel cannot be pasted). 3. Tear off the white release paper on the back and start pasting. When pasting, tear off the side stickers from top to bottom to squeeze out the air as much as possible. 4. Cut off the edges and hold it with the sole facing upwards when trimming, so it is easier to cut. 5. After sticking, press hard and repeatedly to make it firm. Wear shoes 24 hours after application. The replacement

• 【Self Adhesive Grip】Shoes sole stickers use PVC rubber with a self adhesive backing to attach firmly to the area touching the ground. The textured surface helps reduce slipping on high heels boots and dress shoes.
• 【Transparent Sole Cover】Anti slip sole protectors feature a clear design that stays less visible on the bottom of shoes. Suitable for heels stilettos and boots while helping protect the sole from daily outdoor wear.
• 【Cut to Fit Design】Width is approx 10 cm 3.9 in and the sheet can be trimmed with small scissors for different shoe shapes. Apply only to the front sole contact area for a more precise fit.
• 【 Backing】The backing resists wear and weathering for longer use in outdoor conditions. After application press repeatedly for a firm bond and wait 24 hours before wearing the shoes.
• 【Easy Removal Method】To replace the sole protector stickers heat the sole gently with a hair dryer to soften the adhesive, then peel slowly. This method helps remove the sticker with less pulling on the sole surface.