Driver Side Power Window Switch No.2059056811 with Tool Window Control Switch for Mercedes-Benz GLC300 C350e C63 for AMG 2016-2018 Black

Features:The car power window switch is used to control the window.Easy to use, installed in a few minutes. Directly replace the old or broken power window switch.Made of plastic and metal, durable for your car.Please make sure that the OE number you need with our consistent before you order it.Details:Condition: Brand NewMaterial: Plastic, MetalColor: Black, Silver ToneNumber of Pins: 3Dimension: 15.1x5.1x4.4cm / 5.94"x2.01"x1.73"(L*W*H)OE Number:2059056811Fitment:for Mercedes-Benz GLC300 2016-2018for Mercedes-Benz C350e 2016-2018for Mercedes-Benz C63 for AMG 2016-2018for Mercedes-Benz C300 2015-2018for Mercedes-Benz C43 for AMG 2017-2018for Mercedes-Benz C63 for AMG S 2015-2018for Mercedes-Benz GLC43 for AMG 2017-2018Installation:Inspect fuse box for faulty or open fuses.Remove the power window switch from the door panel.Depending on your make and model - you may need to remove the door panel to access the cabling for the switch.Install a new power window switch into the door panel.Reconnect power window switch. Test the window and switch operation before installing the door panel.Reinstall door panel and power.Please Note:This is a non-OEM product, accessory only.Please allow 1-3 mm difference due to manual measurement.Make sure this is the correct application type of power window switch before placing order.Package List:1 pc Power Window Switch1 pc Removal Tool

• Replacement For - OE Number:2059056811; suitable for Mercedes-Benz GLC300 2016-2018, for Mercedes-Benz C350e 2016-2018, for Mercedes-Benz C63 for AMG 2016-2018, for Mercedes-Benz C300 2015-2018, for Mercedes-Benz C43 for AMG 2017-2018, for Mercedes-Benz C63 for AMG S 2015-2018, for Mercedes-Benz GLC43 for AMG 2017-2018.
• Function - Replace the old power window switch. Button Function:
• Material - The electric window switch is made of plastic and metal, which is not easy to break, has a long service life and is durable. When the window switch cannot be used normally or is damaged, it is recommended to replace it in time.
• Installation - 1.Use a skateboard to carefully pry the old switch out; 2. Pull the plug from the old switch; 3. Connect the new switch to the wiring harness; 4. Finally, install it on the window switch bezel bracket.
• Purchase Note - 1.This product is non-OEM item; it is solely an accessory. 2.Turn off the power before installation. 3. Please pay attention to the mating plug before installing the switch, and clean the excess dust. 4. Before making a purchase, please ensure that the product is compatible for your specific vehicle model.