Drainless Holeless Shower Bracket Bathroom All Purpose Adjustable Holder Wall Mounted Base Stand

Name: Shower StandMaterial: ABSSize: 15.7cm*5cm*7cmProcessing method:Injection moldingColors: Gray , Green , WhiteNote: Due to manual measurement, there may be some errors in the size. The actual size should be based the physical objectDue to different lighting conditions, the actual color may be slightly different from the picture. To ensure accuracy, please refer to the physical objectIt can adjust the angle and fits different handheld shower heads. Better bathing experience.

• The wall surface must be dry, smooth, free of dust and oil stains. Preferably use tiles, glass, and marble. It is not recommended for uselatex paint, wallpaper, or rough cement surfaces
• After installation, let it stand for 12 to 24 hours before use. Allow the adhesive to fully cure to avoid detachment under force upon initial application
• Avoid installing in areas exposed to direct hot water spray or high-temperature exposure for long periods. This can prevent the adhesive from softening and losing its effectiveness.
• The load-bearing capacity is limited. Only fix regular shower heads. Do not hang heavy objects or towels to prevent falling and damage
• If you need to dismantle, you can use a hair dryer to heat and soften the adhesive layer, then slowly peel it off to reduce residual adhesive and damage to the wall surface
• This shower holder is adjustable, you can change the angle at will, put the shower arm a appropriate angle that you feel comfortable, making bathing easier and more enjoyable for the whole familly