Diablo Controls DSP-10 Parking/Vehicle Detector

DSP-10 Parking/Vehicle Detector. The DSP-10 vehicle detector has been specifically designed to handle all access control, drive-through, and parking, applications. It can be used on entrance loops, safety loops, or free exit loops. With dual relay outputs, extension, delay, pulse on exit or entrance and the flexibility to be either "fail safe" or "fail secure," it is the only parking detector you will ever need.

• The DSP-10-LV is intended to be an ‘all-in-one’ vehicle detector designed for the parking, drive-through, and access control industries. 10 to 30 volts AC or DC
• The DSP-10 was designed for systems that need reliable vehicle detection. This detector is designed to operate utilizing a single inductive loop typical in these industries. the small packaging comes without sacrificing performance.
• Designed to retrofit into existing locations that may require a detector upgrade. Sophisticated noise filtering algorithms offer stable operation in noisy or troublesome installations.
• The DSP-10-LV is protected from damage if plugged into a higher voltage. No need to change a fuse or reset a circuit breaker, simply plug the detector into the proper voltage and it works.
• Plug and play, Works on any in-ground inductive loop from 20 to 2000 microhenries, Can be easily changed to fail safe or fail secure mode in the field. Advanced filtering technology for superior noise tolerance.