Co2 Beer Regulator, Dual Body, Three Gauge, Taprite Brand, with 2 swivel nuts, 5/16 barb and 1/4 barb

This Dual Body Regulator by Kegconnection is perfect for those who want to keep different pressure on different beer styles. It is also used for those who wish to have beer and soda off the same CO2 tank. You can serve multiple kegs with this system by adding an air distributor to one or both outlets. Made in the USA Taprite Regulators are a commercial grade beer regulator that is used by professional installers in bars and restaurants all over the world. They are also available for your home brew draft beer system, so you can experience the same quality and reliability as the professionals. This is the most consistent, reliable regulators in on the market today. Includes Kegconnection's Double Length Warranty. Assembled and tested in the USA. Built in accordance with UL Standard 252 and the requirements of MIL-STD-105E Built in O-ring Seal to CO2 cylinder, don't have to keep up with fiber washer! Stays on pressure even as your CO2 cylinder goes down in volume. Available in many configurations to fit your needs, including primary and secondary models. Rebuild kits are available so you can keep this regulator in service indefinitely. 10 Micron Filter built in to keep contaminants out of regulator Comes with 1/4 inch MFL ends on check valves. Pick 5/16 or 1/4 inch barbed swivel nuts depending on the size of the hose you will be using.Bonus: Kegconnection adds an Additional 1 year warranty.)

• Easy Adjust Poly carbonate Bonnet will not chip, break or fade. Bonus: Kegconnection adds an Additional ONE year warranty.)
• Individual shut off valves allow you to switch on/off each CO2 line
• Made in the USA Taprite Regulator has one-0-2000 gauge measures CO2 in tank and 0-60 gauges measure pressure to each keg
• This regulator allows you to tap two kegs at the same time and control the pressure to each keg
• Includes 2 Swivel Nuts with two 5/16" barb and 2 1/4" barb, works with 5/16 & 1/4" ID Gas Hose!