CNYST Shore C Durometer Hardness Tester C Type with Recommended Range of Measurements 10 ～ 90HC Needle Stroke 2.5 mm Applicable to The Hardness Test of Rubber Microporous Material

Function LX-C hardness tester is used in measuring the hardness of oak model micro porous material which includes vesicant when the compression ratio is 50%, the stress above 0.5kg/cm2. It also can be used in other similar hardness materials. The product meets the requirements of HG/T2489 and other relevant standards. Character * It is not necessary to observe the value in real time according to the change of the measuring angle. As long as the measurement is done, the driven pointer is directly positioned on the numerical scale of the measurement to be read conveniently, and the error caused by the change of the observation angle is eliminated. *Type C: applicable to the hardness test of rubber microporous material. * Needle indicates, convenience the user to read., high accuracy. * Handhold design, carry conveniently, Technical Specifications * Dial value: 0 ～ 100HC * Needle stroke: 2.5 mm * Recommended range of measurements: 10 ～ 90HC * Needlepoint size: SR 2.5 mm * Size: 115 x 60 x 25mm * Weight: 0.16 kg

• ◆ Dial value: 0 ～ 100HC; Recommended range of measurements,10 ～ 90HC
• ◆ Needle stroke: 2.5 mm; Needlepoint size: SR 2.5 mm
• ◆ Type C: applicable to the hardness test of rubber microporous material.
• ◆ Hardness tester is used in measuring the hardness of oak model micro porous material which includes vesicant when the compression ratio is 50%, the stress above 0.5kg/cm2. It also can be used in other similar hardness materials.
• ◆ Needle indicates, convenience the user to read., high accuracy.Handhold design, carry conveniently,