CANADUINO® FM Stereo Radio Receiver DIY Soldering Kit with LED Display and Headphone Jack

Product description DIY FM Stereo radio receiver kit with LED display, based on the RDA5807 chip. This kit includes a built-in amplifier with speaker and 3.5mm headphone port. Power can be supplied using 2 AA batteries or through a USB port. Since the Soldering Kit requires to solder a few SMD parts, we don't recommended this kit for beginners. A proper soldering station with pencil tip and fine solder (0.6-0.8mm) is highly recommended to makes this project a success. You control the frequency and audio volume with tactile push buttons. The frequency is shown on 4-digit LED display. A trim potentiometer allows adjust the maximum audio level to avoid clipping. Assembly (soldering, including some SMD parts) is required. Includes all components, speaker, antenna, enclosure, and battery holder. Specifications: Supply voltage: 5V DC (USB) or 2 x batteries Frequency range: 87.0 MHz to 108.0 MHz Frequency step: 0.1 MHz Audio output: 0.5W (mono speaker or stereo headphones) Display: 4-digit LED Size (assembled): 95 × 59 × 25 mm Controls: Volume Up / Down Frequency Up / Down (long press for scan) Kit Contents: PCB and components (including a few SMD components) RDA5807 FM receiver IC LED display speaker, antenna stick, battery holder Enclosure and screws Applications: Hands-on soldering and radio DIY learning STEM education, school workshops Gifts and electronics projects Manufacturer Contact Information support@universal-solder.com

• FM Radio DIY Soldering Kit with speaker and stereo headphone output
• Power supply using USB power adapter/charger or 2 standard batteries
• Dimensions 95 x 59 x 25mm