Brewing equipment 4'(1.2M) Red Gas Line Assembly Ball Lock 5/16"(8mm) ID Vinyl Tube Odorless Draft Beer Dispensing Hose Brewing equipment(NO QD)

4'(1.2M) Red Gas Line AssemblyAir lines for draft beer systems connect the draft regulator to the keg coupler, and are made from the same material as vinyl beer lines. This hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals.NO Quick DisconnectThe tubing is rated to carry gas. Attached is a 5/16" swivel nut and hose clamp. Used in unison these provide a completely secure seal. One end of the tubing is open and has no attachments.Assembly Includes:* 5/16"(8mm) ID Red Vinyl Tubing x 4'* Stainless steel Hose Clamp(10-16mm) x 1* Stainless Steel Stepless Clamp x 1* Chrome Plate Swivel Nut - 1/4"FFL x 5/16" Barb x 1With Quick DisconnectClamp the open end to the gas-out of your regulator or CO2 manifold, hook up the ball lock fitting to your Cornelius keg, and you're ready to pressurize kegs.Assembly Includes:* 5/16"(8mm) ID Red Vinyl Tubing x 4'* Stainless steel Hose Clamp(10-16mm) x 1* Stainless Steel Stepless Clamp x 1* Chrome Plate Swivel Nut - 1/4"FFL x 5/16" Barb x 1* Gas Ball Lock Disconnect - 1/4"MFL==========Hign-concerned Chemical : NoneProduct Type : Carbonation Equipment

• Air lines for draft beer systems connect the draft regulator to the keg coupler, and are made from the same material as vinyl beer lines. This hose will not rot, swell, or dry out and is unaffected by normal beer line cleaning chemicals.
• NO Quick Disconnect
• The tubing is rated to carry gas. Attached is a 5/16" swivel nut and hose clamp. Used in unison these provide a completely secure seal. One end of the tubing is open and has no attachments.