Birm - for Iron Removal - 1 CUBIC FOOT

★★★★★ 4.7 17 Bewertungen

€60.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Verkauft und versendet von copisteriaunio.egardata.net
Wir bemühen uns, Ihnen genaue Produktinformationen anzuzeigen. Hersteller, Lieferanten und andere stellen die hier gezeigten Angaben bereit.
€60.00
Preis bei Onlinekauf
Kostenloser Versand 30 Tage kostenlose Rückgabe

Wie möchten Sie Ihren Artikel erhalten?
Die ersten 30 Tage sind kostenlos! Wählen Sie den Tarif an der Kasse.
Versand
Ankunft 22.10.
Kostenlos
Abholung
In der Nähe prüfen
Lieferung
Nicht verfügbar

Verkauft und versendet von copisteriaunio.egardata.net
30 Tage kostenlose Rückgabe Details

Produktdetails

Artikelnummer 230806991 Erscheinungsdatum 2026/06/18 Listenpreis €60.00 Modellnummer 230806991
Kategorie

Birm is used to remove dissolved iron and manganese. The Ph must be above 6.8 and dissolved oxygen content must be equal to 15% of the iron and manganese content. No regeneration is required, only periodic backwashing. Birm is an efficient and economical media for the reduction of dissolved iron and manganese compounds from raw water supplies. It may be used in either gravity fed or pressurized water treatment systems. Birm acts as an insoluble catalyst to enhance the reaction between dissolved oxygen (D.O.) and the iron compounds. In ground waters the dissolved iron is usually in the ferrous bicarbonate state due to the excess of free carbon dioxide and is not filterable. Birm, acting as a catalyst between the oxygen and the soluble iron compounds, enhances the oxidation reaction of Fe++ to Fe+++ and produces ferric hydroxide which precipitates and may be easily filtered. The physical characteristics of Birm provide an excellent filter media which is easily cleaned by backwashing to remove the precipitant. Birm is not consumed in the iron removal operation and therefore offers a tremendous economic advantage over many other iron removal methods. Other advantages of Birm include; long material life with relatively low attrition loss, a wide temperature performance range and extremely high removal efficiency. Negligible labor costs are involved because Birm does not require chemicals for regeneration, only periodic backwashing is required. When using Birm for iron removal, it is necessary that the water: contain no oil or hydrogen sulfide, organic matter not to exceed 4-5 ppm, the D.O. content equal at least 15% of the iron content with a pH of 6.8 or more. If the influent water has a pH of less that 6.8, neutralizing additives such as Clack Corosex®, Calcite or soda ash may be used prior to the Birm filter to raise the pH. A water having a low D.O. level may be pretreated by aeration.

  • 1 cu. ft. birm filter media used in iron filter tanks
  • Removes iron, manganese, general filtering of dirt, rust, sediment
  • This media CANNOT be shipped to California.
Brand Addie Water
Pool chemical type Bromine Pool Chemicals
Form Granules
Rec. use Swimming Pool
Size 1.0 cu ft
Weight 47 lb
Product net content uom Count
Product net content parent 1 Count
Pack quantity 1

Korrektur der Produktinformationen

Wenn Sie Unvollständigkeiten oder Fehler in den Produktinformationen auf dieser Seite bemerken, nutzen Sie bitte das Korrekturformular unten.

Korrekturanfrage

Kundenbewertungen

4.7 von 5
★★★★★
17 Bewertungen | 7 Rezensionen
So wird die Artikelbewertung berechnet
Alle Bewertungen anzeigen
5 Sterne
86% (15)
4 Sterne
2% (0)
3 Sterne
1% (0)
2 Sterne
1% (0)
1 Stern
10% (2)
Sortieren nach

Für dieses Produkt liegen derzeit keine schriftlichen Bewertungen vor.