Automation Systems Interconnect RAI-SAC-RJ45-CB-3 Through Panel Single AC Outlet, RJ45 Connector and 3 amp Circuit Breaker, NEMA 4, 4X, IP65 Rating

The ASI RAI-SAC-RJ45-CB-3 is an RJ45 connector, 3 amp circuit breaker and ac outlet panel interface connector housed in a robust aluminum connector housing with a locking cover. The circuit breaker is rated at 3 amps at 250Vac and the AC outlet is rated at 15 amps at 120 Vac. Whether it is a tripped circuit or for manual operation, you only have to open the locking cover of the panel interface connector mounted on the exterior of the panel in order to access the circuit breaker. The convenience AC outlet provides an external source for AC power near the equipment. The remote access interface or panel interface connector mounts with 4 screws in a cut-out made on the side of a panel. Once mounted, there is a protected gateway between the inside and outside of the panel. The housing is gasketed so that the mounting to the enclosure wall is sealed and when the locking cover is closed and a protection level of NEMA 4, 4X or IP65 is achieved. The internal connections to the remote access interface or panel interface connector are easy to wire after installation. The range of options for ASI panel interface connectors include AC receptacles or outlets, circuit breakers and connectors such as RJ or Ethernet connections, and D-subminiature. RAI-SAC-RJ45-CB-3 is a panel interface connector with one 3 amp circuit breaker, one AC outlet and one RJ45 connector. .

• Through panel interface consisting of RJ45 unshielded connector
• Robust fully enclosed housing for complete protection and lever actuated latch ensures cover locks tightly
• Components are securely mounted in back plate with rear access connection for easy wiring
• NEMA 4, 4X, IP65 Protection Rating
• Ideal for all types of factory applications, including wash-down