Aluminum(2 x 5.25 Open Space to 3 x 3.​5" SAS/SATA 6.0G HD)(Tray-l​ess Hot-Swap Cage)(Backp​Lane) TL-335

PRODUCT TECHNICAL SPECIFICATIONS Two 5.25" space converted to three 3.5" hotswap module (additional RAID Controller Card needed) Support 3 x 3.5" SATA2/SATA3(6G) and SAS-1/SAS-2(6G) HDD, maximum 25.4mm high HDD compatible Entire mechanism by heat conductive aluminum extrusion heatsink with glossy brushed finish on the surface TrayLess mechanism design with front aluminum security keylock hinges 1 blue Power LED & 3 purple HDD LED (HDD inserted as blue, non-inserted as no light, flash purple as accessing) Cooling system with one 70mm x 15mm exhaust fan at rear side of HDD cage Rear interface (1): 3 x SATA 7pin data transfer port, 2 x SATA 15pin psu input port, HDD access signal on/off switch Rear interface (2): high speed fan or low speed fan adjustable switch Accessory Pack: key x 2pcs, M3 round head nickel screw x 8pcs Product dimension: 190(L) x 146(W) x 86(H)mm Package: N.W. 0.76 KGM, G.W. 0.92 KGM, CUFT 0.199 (253mm x 124mm x 180mm, single box packed); S/H $15

• Aluminum 2x5.25" to 3x3.5" SAS/SATA Trayless Hot-Swap Cage Backplane TL-335
• Support 3 x 3.5" SATA2/SATA3(6G) and SAS-1/SAS-2(6G) HDD, maximum 25.4mm high HDD compatible
• Two 5.25" space converted to three 3.5" hotswap module (additional RAID Controller Card needed)
• Cooling system with one 70mm x 15mm exhaust fan at rear side of HDD cage
• Dimension: 190(L) x 146(W) x 86(H)mm