550W Wet Model Trimmer Abrasive Diamond Disc Wheel JT-19C Dental Lab Equipment

★Features★1. Connect one end of the water tube to the nozzle of the wet model trimmer and the other end to the tap, open the valve.2. Connect the waste-disposal tube to the unit.3. Connect the power cord, and switch on the power switch (O=off, l=on)4. When braking, it is normal to hear clicking before the sand tablet stops. If the sand tablet makes unusually loud noises, remove it, and use the included hex-wrench to adjust the screw on the back cover (18). 5. To check if you need to replace the abrasive disk, rotate the disk by hand and estimate: if the platform jumps more than 2mm, change the disk. After replacing the disk, make sure to tighten the ring on the platform 8 (closest to the outside of the sand tablet).★Specifications★Voltage: 220V/50Hz±10% , 110V/60Hz±10%Power: 500W Rotational Speed: 2800 rpm Dimensions: 44×35×35cm Weight of the den~tal trimmer: 20kg★Attention★ If there is some abnormal noise when working onPossible reason：① Axon is loosing ② Disc is not plain enough。How to solve it：①Dissemble the disc⒃ with spanner，make the snap Ring tightly；② change the disc。The machine does not work when power onPossible reason：① fuse get burnt；② motor get burnt；③ switch get wrong.How to solve it：① change the fuse（22） which inside the socket；② change the mo~tor；③ change the switch。★Packing list★ Wet Model Trimmer Abrasive Disc Wheel Dental Lab Equipment *1Power cord *1

• ★1. This is a necessary tool to trim plaster model, this machine is made of anti-rust all cast aluminum.
• ★2. Due to its outstanding durability, we have received high praise and trust from our customers. It is a popular item since its release.
• ★3. It is a very durable model trimmer.
• ★4. Model trimmers are widely used in restorative dentistry.
• ★5. The angle can be adjusted between 0-20 °. Users can achieve perfect trimming quality.