1PCS Saw Blade Circular Milling Cutting Disc Tool CNC Slot Machining Tungsten Carbide Steel Diameter 50-70MM Cutting Metal Sliding(70mm-D22.0.9mm)

Saw blade (1 PCS) NOTE: Required for use with the tool holder NOT INCLUDED in this link. Click on the image below to purchase if necessary. Material: Overall combined with full tungsten steel, cutting iron like mud, using special mixed processing of steel gratings, shockproof, wear-resistant, high temperature resistance, long service life. Double-sided high-gloss mirror effect, good shine. Overall leveling design, smooth surface, smooth and efficient cutting. Processing: Precision: Inner Hole--+0.01~0.02 Outside--±0.02 Saws: Saw teeth precision grinding processing, angle scientific design, sharp, smooth machining, no fire plate, no rolling edge, no burr. The thinner the saw blade is, the more sensitive it is to vibration and tensile load during operation. If there is radial swinging or axial swing, it is easy to cause damage. Bad. Therefore, the milling machine must work in a stable state, that is, the machine tool has high precision, good stiffness of the cutter bar and stable transmission. Feed quantity per tooth Constant and sufficient cooling. The specific requirements are as follows: <;0.02mm, axial swing 0.01mm. 2. As long as the milling depth of the cutter is not affected, clamp the two sides of the blade to the milling rod with a large flange plate as much as possible to eliminate vibration and avoid lateral compression. Generally, the diameter of the flange plate is not less than 1/3 of the outer diameter of the saw blade. 3. A reasonable linear milling speed Vc and feed speed Sz per tooth should be selected. In general, the whole hard alloy saw blade cutter under the same conditions can choose Vc faster than the high-speed steel saw blade milling cutter, but the feed rate per tooth should be lower than the feed rate of high-speed steel. Sz can typically be set between 0.005 and 0.025/tooth. The specific parameters should be determined by the user based on the speed of the milling machine, the properties of the milling, its thickness, the number of teeth, the milling depth and other factors are determined. Vc: P: 70~150, 50~80 K: 80~120 m:70~120cm N:200~350 s:20~50 Outer diameter - Cutting depth 40mm - 3mm 50mm-- 5mm 63mm-8mm 70mm--10mm 75mm--12mm 80mm--15mm 100mm--20mm 125mm-30mm ========== Highly Concerned Chemical : None is_customized: Yes Origin: Mainland China Finish: White Model Number: sawmill Blade material: tungsten carbide steel Size: 40mm Number of pieces: 1 pc Blade type: circular saw blades Usage: commercial production Teeth: 72

• Size: 50-70MM
• Number of pieces: 1 pc
• Blade type: circular saw blades
• Usage: commercial production
• Teeth: 72